Original 24V 90A 1212p-2502 Curtis DC Motor Controller for Liftstar Pallet Truck

Product Description

Product Description

The 1212 is designed for use in low power DME applications such as micro-scooters, mini-scooters, foldable scooters, and low-end personal mobility vehicles. Although it is optimized for use on modern 3-wheel and 4-wheel mobility aid scooters, its programmable options also allow it to be used on any low power permanent magnet motor application.

 

Specifications:
. Nominal input voltage: 24 V
. PWM operating frequency: 15.6 kHz
. Electrical isolation to heatsink (min.): 500 V
. Minimum motor resistance: 160 mΩ (45 amp models); 120 mΩ (70 amp and 90 amp models)

 

. B+, B- logic pin current (max.): 9 A (pins 7 and 13 on 14-pin connector)
. KSI input current (typical): 80 mA
. Logic input current (typical): 1 mA

. Horn output current (max.): 15 mA
. Lift lockout output current (max.): 50 mA [1212P only]
. BDI output voltage, resistance (max.): 0-5 V, 10 kΩ
. LED output current (max.): 15 mA

. Electromagnetic brake coil resistance (min.): 32 Ω

. Throttle type: resistance or voltage; single-ended, inverted single-ended, wigwag, inverted wigwag, or unipolar

. Storage ambient temperature range: -40°C to 65°C (-40°F to 149°F)
. Operating ambient temp. range: -25°C to 50°C (-13°F to 122°F)

. Heatsink overtemperature: linear cutback starts at 80°C (176°F); complete cutoff at 105°C (221°F)
. Heatsink undertemperature: cutback starts at -10°C (14°F) and is reduced linearly to 50% at -25° (-13°F)

. Undervoltage cutoff: 14 V
. Overvoltage cutoff: 34 v
. Package environmental rating: ISTA 2A; electronics sealed to IPX5
. Weight 0.3 kg (0.7 lbs)
. Dimensions (W× L×H) 72 × 131 × 39 mm (2.8" × 5.2" × 1.5")
 

Name	Model	Dimensions	Weight
Controller	1212p-2502	72 × 131 × 39 mm (2.8" × 5.2" × 1.5")	0.3 kg (0.7 lbs)

 

Packaging: Normally we use the standard exporting packaging , we also can according to clients' request .

 

Shipping: For sample or samll quantity,the item will be sent in 48 hours after the payment confirmed,

through an expedited service (Fedex, DHL, TNT, UPS or EMS),tracking number will be available.

For large quantity,the goods will be send in 10-25 days by sea or air.

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: What is your advantages?
A:  * * A manufacture with 15 years experiences
      * * Free samples are accepted
      * * Customized sizes are accepted
      * * Most types and sizes are in stock
      * * Fast delivery and production 
Q: How to order ?
A: Pls contact me through email, Tel, skype or whatsapp,tell me what you need and I will offer according to your requirement .After you confirm , I will send PI for payment .

Q: How to produce ?
A:we can produce according to seal type and sizes .

  if you need some customized parts, we can produce according to drawing and samples .
Q: How to deliver ?
A: for small order, we will deliver by express, such as DHL, FEDEX, UPS,TNT.etc 
    for large order , we can deliver by air or by ship .

Q: About payment ?
A: we accept : T/T, PAYPAL, WESTERN UNION or L/C 
    as usual , 30% advance payment in advance .